Sanco Group – Advancing at sea

Share on socials:


Sanco Group was founded to fill gap in the market for ships that could deliver bunkers and provisions to seismic vessels whilst still in operation. Thirty years on, the company has evolved into owning and operating its own advanced source and 3D seismic vessels, working for some of the world’s most renowned geophysical companies. CEO Rudy Amundsen discussed three decades of success, in conversation with Hannah Barnett.

As a leading provider of high-quality solutions for the offshore energy industry, Sanco Group offers a fleet of purpose-built vessels to aid the retrieval of hydrocarbons. The company’s founder, Ivar Slettevoll is a former marine officer with 20 years of seafaring experience, 15 of which were spent as a Captain of highly-advanced seismic vessels. This has influenced the direction that the company has taken in the energy sector today.

“With node seismic, we rarely search for oil and gas,” said CEO, Rudy Amundsen. “We help monitor the subsurface reserves, so that the oil companies can make informed decisions on how to extract more from mature oil fields. Our main goal is to increase the recovery rate, which can vary from 30 to 55 per cent, depending on where you are in the world. It makes sense financially, when it can take up to 10 years before a new oilfield starts generating revenue.”

Seismic changes

Thirty years ago, Sanco began operations providing safe, efficient offshore resupply to seismic vessels via an innovative use of inline bunkering. 

“We started cautiously as a response to a specific operational challenge faced by our clients,” explained Mr Amundsen. “Seismic vessels were required to suspend operations and retrieve equipment to return to port for fuel bunkering, resupply and crew changes before heading back out and redeploying. With 12 streamers, each measuring eight or nine km in length, towed behind the vessel, this could result in up to a week of lost revenue.” 

Sanco found that positioning its support vessel ahead of the seismic vessel meant that fuel was delivered effectively without requiring the customer to change speed or course. Within ten years, however, Sanco had decided to move up the value chain and build and operate seismic vessels itself. 

The first vessel built was specifically designed for Ocean Bottom Cable (OBC) operations, many years before nodes became the dominant technology. Sanco subsequently built a 2D seismic vessel the year after in 2009, before taking the next major step and building two 3D seismic vessels in 2013 and 2014.

Today, Sanco is a lean organisation: 15 onshore employees currently manage five vessels, with a total crew of approximately 300. Annual utilisation over the past three years has exceeded 90%. Sanco’s strength lies in being an independent shipowner, allowing the company to work with all clients across the market. The current ownership structure also supports higher-quality strategic decision-making and faster execution. 

“As the largest shipowner within our niche, we have collaborated closely with suppliers on the development of equipment,” Mr Amundsen said. “Today, we are solely focused on source vessels. Our support vessels have been sold and our largest vessels, originally built for 3D operations, are operating in the OBN segment as source vessels.”

Upgrading the offering

Sanco’s vessels are equipped with state-of-the-art source systems that generate controlled pressure waves, which are captured by advanced seismic nodes on the seabed. The processed and visualised data is used to improve subsurface imaging and, ultimately, to increase recovery from existing oil and gas fields.

Sanco Sailor, for example, was originally built as a streamer vessel and operated in that role until the company acquired her in the summer of 2025. 

“Because our strategic focus is on the OBN segment, we decided early on to convert Sanco Sailor for source operations,” explained Mr Amundsen. “We removed the large streamer winches to free up deck space, installed higher-capacity gun winches and a completely new set of airguns and fitted two new compressors. These are all critical upgrades for a source vessel.”

An important decision was to drastically rebuild the slip area so the vessel can tow a wider spread than any comparable vessel, while reducing strain on the equipment. The company also replaced the legacy source controller on Sanco Sailor with modern technology and expanded the deck work area to accommodate two completely new arrays. This enabled the vessel to have up to nine arrays in the water simultaneously. Arrays that are now separated by steerable barovanes for more efficient operations. These are “capabilities only a handful of vessels worldwide can match,” as Mr Amundsen said.

Converting a relatively mature vessel on this scale required extensive and close collaboration between Sanco, the shipyard, naval architect and subcontractors. The vessel went straight into service and has performed flawlessly, which is a testament to the dedication and professionalism of all parties involved in the project. 

A solution for the future 

Activity in the seismic segment fell sharply during the oil downturn that began in 2015. Today, the segment is more of a niche, and shipowners, seismic companies and suppliers work closely together to solve technical and operational challenges, reducing costs and improving efficiency. 

In recent years, the company has seen the introduction of low-frequency sources. These generate pressure waves that penetrate certain subsurface structures more effectively and can reveal new information. 

“The main technological challenge here is that low-frequency sources require significantly more air than conventional source configurations,” Mr Amundsen explained, “so close collaboration with suppliers and designers is essential to make the technology work reliably offshore.”

Moving forward, Sanco’s stated objective is to be the first company that seismic operators call when they need a source vessel. The company ethos is that until the world can fully replace the energy it gets from hydrocarbons with lower-emission alternatives, it makes sense to continue to improve recovery from existing oil and gas fields.

“It is not the case that people working in our industry care less about environmental sustainability,” said Mr Amundsen. “We also want to breathe clean air and live in a natural environment that is in balance. However, a growing population also needs more energy than renewables alone will be able to provide for decades to come. Therefore, it is likely that we will maintain current production levels, or see only a modest decline, while the increase in demand is met by hydro, solar, wind and other renewable sources.”

Indeed, being part of a dynamic specialised industry is no doubt highly satisfying, rewarding and motivating. Not to mention, the fact that a job at Sanco requires a truly wide range of skills and knowledge.

“Although we are specialists, we are a small company, which means everyone needs to be proficient in more than one discipline,” Mr Amundsen said, in conclusion. “My workdays are highly varied, and I thrive on the diversity that brings. It requires structure, but I wouldn’t have it any other way.”